Integrated Project Delivery from Engineering to Handover
RIDA T.S. provides EPC and turnkey project execution for industrial facilities and infrastructure in Libya. Our multidisciplinary teams coordinate engineering, procurement, fabrication, construction, electrical and instrumentation works, commissioning, start-up and final handover within an integrated delivery framework.
Our EPC capabilities support oil and gas facilities in Libya, metering stations, process packages, utility systems, pipelines, skid-mounted units and water and wastewater infrastructure.
Projects are planned around the approved technical scope, contractual requirements, execution schedule, site conditions and client operating objectives.
Capabilities:
Integrated EPC Delivery
EPC project execution requires continuous coordination between technical disciplines, suppliers, fabrication facilities, construction teams and the client’s project organization.
RIDA T.S. establishes an execution structure covering the main project phases, from initial design development and procurement planning through construction, system completion and handover.
Interfaces between process, mechanical, piping, civil, electrical, instrumentation and control disciplines are reviewed throughout the project lifecycle. This coordinated approach supports constructability, equipment integration, schedule control and the progressive completion of project systems.
Where a project requires early technical definition or specialist studies, RIDA T.S.’s engineering and consultancy services can support concept development, feasibility assessment, FEED activities and detailed engineering.
Engineering and Design
Engineering establishes the technical basis for procurement, fabrication, construction and commissioning.
The engineering phase begins with a review of the client’s objectives, available site information, operating requirements, technical specifications and applicable contractual documentation.
Depending on the project scope, engineering activities may include:
- Design-basis development
- Site surveys and field-data collection
- Feasibility and concept studies
- Process and utility calculations
- Process flow diagrams and P&IDs
- Equipment sizing and technical specifications
- Piping layouts and material specifications
- Civil and structural design
- Electrical load assessment and distribution design
- Instrumentation architecture
- Control philosophy development
- Constructability reviews
- Interdisciplinary design reviews
- Issued-for-construction documentation
Engineering deliverables are developed according to the client’s specifications, applicable regulatory requirements and the codes and standards defined for the project.
Technical interfaces are reviewed before construction documentation is issued to reduce inconsistencies between process equipment, piping, structures, electrical systems, instrumentation and control functions.
Procurement and Vendor Coordination
Procurement is integrated with engineering and construction planning to align technical approvals, equipment availability, logistics and site priorities.
RIDA T.S. manages equipment and material sourcing through its industrial procurement and supply chain services.
Depending on the project, procurement activities may include:
- Preparation of material requisitions
- Requests for quotation
- Technical and commercial bid evaluation
- Supplier and manufacturer coordination
- Vendor-document review
- Purchase-order follow-up
- Inspection coordination
- Factory Acceptance Testing
- Expediting
- International and local logistics
- Customs and shipping-document coordination
- Delivery to the fabrication facility or project site
Long-lead equipment and critical materials are identified during project planning so that purchasing activities can be aligned with the engineering schedule and the required construction sequence.
Vendor documentation is reviewed against the approved technical requirements before equipment is released for fabrication, shipment or installation.
Fabrication and Packaged Systems
RIDA T.S. coordinates the fabrication and integration of skid-mounted systems, piping assemblies, metering packages, chemical injection units and industrial utility equipment.
For projects involving fiscal, allocation or process measurement, our measurement and metering systems capabilities support the engineering, supply and integration of flowmeters, metering skids, prover systems and associated instrumentation.
Fabrication activities may include:
- Structural skid fabrication
- Equipment installation and alignment
- Process and utility piping
- Valve and specialty-component installation
- Electrical and instrumentation installation
- Junction boxes and cable systems
- Local control-panel integration
- Surface preparation and protective coating
- Inspection and testing
- Preparation for transport and site installation
Inspection and testing requirements are defined according to the equipment type, approved drawings, project specifications and inspection and test plan.
Packaged systems are prepared for transportation with consideration for lifting, preservation, protection, site access and final installation requirements.
Construction and Site Execution
Site execution covers the coordinated installation of civil, structural, mechanical, piping, electrical and instrumentation systems.
Construction planning considers available work fronts, resource requirements, material readiness, site access, lifting activities, temporary facilities, interfaces with existing infrastructure and operational restrictions.
Typical construction activities may include:
- Site preparation
- Excavation and civil works
- Foundations and equipment supports
- Structural-steel installation
- Equipment setting and alignment
- Piping fabrication and installation
- Pipeline and tie-in works
- Cable-tray and cable installation
- Electrical-equipment installation
- Instrument installation and hook-up
- Control-panel installation
- Testing and system reinstatement
For brownfield projects, the execution sequence is coordinated with the client to address existing-plant interfaces, shutdown requirements, isolation procedures and permit-to-work conditions.
Construction activities are progressively recorded to support inspection, system completion, commissioning and final documentation.
Electrical, Instrumentation and Control Integration
Electrical, instrumentation and automation activities are coordinated with the mechanical and process scopes to support integrated facility operation.
The work may cover:
- Electrical distribution
- Motor-control systems
- Field instrumentation
- Control and shutdown panels
- Programmable logic controller interfaces
- Communication networks
- Fire and gas interfaces
- Supervisory control functions
- Equipment status and alarm integration
- Power and signal cabling
- Instrument calibration and loop testing
RIDA T.S. can incorporate its automation, SCADA and control systems capabilities into the EPC scope, including control-system configuration, field-instrument integration, signal verification and functional testing.
System architecture and equipment interfaces are developed according to the approved control philosophy and the operational requirements of the facility.
Construction Quality and HSE Controls
Project-specific quality and HSE controls are implemented throughout fabrication, construction, testing and commissioning.
Quality activities may include:
- Material verification
- Vendor-document review
- Inspection and test plans
- Welding-procedure control
- Welder qualification verification
- Dimensional inspection
- Coating inspection
- Non-destructive examination
- Pressure-test documentation
- Electrical and instrumentation checks
- Recording and close-out of inspection results
HSE planning addresses the work activities, site environment and applicable client requirements.
Controls may include risk assessments, method statements, toolbox meetings, work permits, lifting plans, isolation procedures, confined-space controls and emergency-response arrangements.
The applicable quality and HSE requirements are established by the contract, approved project plans and site procedures.
Pre-Commissioning, Commissioning and Start-up
Commissioning begins with a structured system-completion process rather than a single activity at the end of construction.
Equipment, piping, electrical systems, instrumentation and control functions are progressively inspected and verified before operational introduction.
Activities may include:
- Mechanical-completion verification
- Cleaning and flushing
- Hydrostatic or pneumatic testing
- Cable continuity and insulation testing
- Instrument calibration
- Loop checking
- Control-logic verification
- Alarm and interlock testing
- Equipment rotation checks
- System energization
- Functional testing
- Performance testing
- Start-up assistance
- Punch-list management
System boundaries, completion status and outstanding activities are monitored to support a controlled transition from construction to commissioning.
Following start-up, RIDA T.S. can provide operations and maintenance support for the installed facilities.
Project handover may also include technical training and operator familiarization based on the equipment and systems delivered under the EPC scope.
Project Controls and Documentation
Project controls provide a structured basis for monitoring engineering, procurement, fabrication, construction and completion activities.
Depending on the contractual requirements, project controls may include:
- Baseline execution schedules
- Detailed engineering and procurement schedules
- Document registers
- Equipment and material tracking
- Progress measurement
- Cost monitoring
- Change tracking
- Risk and action registers
- Construction-progress reporting
- System-completion tracking
- Punch-list monitoring
- Document-control procedures
Regular reporting provides the project team with information on completed activities, upcoming priorities, constraints, procurement status and interfaces requiring coordination.
Final handover documentation may include:
- Approved and as-built drawings
- Equipment data sheets
- Vendor documentation
- Material certificates
- Inspection records
- Test certificates
- Calibration records
- Commissioning reports
- Operating and maintenance manuals
- Spare-parts documentation
- Training records
The final documentation structure is defined according to the client’s requirements and the contractual handover procedure.
EPC Systems and Facilities
RIDA T.S. supports EPC and turnkey execution across a range of industrial systems and facilities, including:
- Oil and gas production facilities
- Early Production Facilities
- Metering stations and custody transfer systems
- Pipelines and process piping
- Skid-mounted process packages
- Chemical injection systems
- Nitrogen generation units
- Seawater reverse osmosis plants
- Water-treatment and pumping systems
- Storage and chemical-handling facilities
- Electrical and instrumentation systems
- Automation and control infrastructure
- Utility and support systems
- Brownfield modifications
- Plant renovation and modernization
The final delivery model is adapted to the technical scope, facility type, project location, contractual allocation of responsibilities and client operating requirements.
Selected EPC and Turnkey Experience
RIDA T.S. applies this integrated delivery approach to industrial projects requiring coordination between engineering, procurement, fabrication, construction and commissioning.
Acid Plant Renovation
The Acid Plant Renovation project covered chemical-storage and mixing equipment, corrosion-resistant piping, containment infrastructure, automation, instrumentation, commissioning and operator training.
Mabruk EPF Metering Skid
The Mabruk Early Production Facility metering project involved the engineering, procurement and integration of a measurement system for a new oil-production facility.
Chemical Injection Skid
The Amal Oil Field chemical injection skid project included structural skid design, pump procurement, instrumentation configuration, on-site installation and chemical-loop testing.
Custody Transfer Metering System
The methanol export custody transfer metering project demonstrates RIDA T.S.’s experience in integrated measurement packages for product-transfer and export applications.
Additional engineering, metering, automation and industrial construction references are available in the RIDA T.S. project portfolio.
Standards and Project Requirements
Codes and standards are defined according to the type of facility, process service, project location, client specifications, regulatory framework and contractual scope.
For oil and gas projects, applicable references may include publications issued through the American Petroleum Institute standards programme.
Project quality-management requirements may also reference the ISO 9000 family of quality-management standards, while occupational health and safety requirements may refer to ISO 45001.
Other project documentation may identify relevant IEC, ASME, ISO or client-specific requirements according to the equipment, systems and activities included in the scope.
The applicable editions, design criteria, inspection requirements and compliance obligations are confirmed during the engineering phase. Reference to an industry standard does not replace project-specific technical review, contractual verification or client approval.
Al-Noflieen Area, P.o.box 536, Tripoli Libya
info@rida-ts.com
Integrated EPC renovation of an industrial acid handling facility in Libya, covering chemical storage and mixing systems, process piping, containment, automation, instrumentation, construction, commissioning and operator training.
RIDA T.S. is providing a foundational measurement system for a new Early Production Facility.
Complete structural skid design, pump procurement, instrumentation configuration, on-site installation, and chemical loop testing.
During a critical service overhaul, this project executed the tie-in activities for six flowmeters