Multidisciplinary Engineering for Industrial and Energy Projects
RIDA T.S. provides engineering and technical consultancy services for oil and gas, energy and industrial projects in Libya.
Our scope covers project definition, Front-End Engineering Design, detailed engineering, multidisciplinary design coordination, process and hydraulic studies, technical specifications, risk assessment support and engineering assistance during procurement, construction and commissioning.
Drawing on our experience as an EPC and turnkey project contractor, our engineering teams develop practical deliverables aligned with site conditions, project specifications and execution requirements.
The objective is to establish a technically coordinated basis for equipment procurement, construction, installation, testing, commissioning and future operation.
Capabilities:
Project Definition, Feasibility and FEED
Engineering support can begin during the early stages of a project, when the technical concept, operating requirements and principal execution constraints are being established.
RIDA T.S. supports the review and development of:
- Project objectives and operating requirements
- Available site and process information
- Design basis and engineering criteria
- Process configuration and equipment requirements
- Preliminary layouts and system architecture
- Technology and equipment options
- Utility and infrastructure requirements
- Interfaces with existing facilities
- Constructability and installation constraints
- Preliminary project risks
- Scope boundaries and execution strategy
Front-End Engineering Design provides the technical definition required to progress into detailed engineering, procurement or an EPC execution phase.
The FEED scope is adapted to the maturity of the project and the information available from the client, facility and existing documentation.
Detailed and Multidisciplinary Engineering
RIDA T.S. coordinates the engineering disciplines required for industrial projects, plant modifications and equipment integration.
Process Engineering
Development and review of process requirements, operating cases, equipment duties, process calculations, process flow diagrams, piping and instrumentation diagrams and control requirements.
Mechanical and Piping Engineering
Equipment selection, mechanical data sheets, piping configuration, line sizing, valve requirements, equipment arrangement, piping layouts, material requirements and integration with existing systems.
Civil and Structural Engineering
Engineering of foundations, equipment supports, structural steel, access platforms, trenches, containment areas and other civil works associated with industrial equipment and plant modifications.
Electrical Engineering
Definition of electrical loads, power distribution requirements, protection, cable routing, earthing, equipment connections and interfaces with existing electrical infrastructure.
Instrumentation and Control Engineering
Instrument selection, measurement requirements, control philosophy, input/output definition, control interfaces, communication architecture and integration with automation, SCADA and control systems.
Multidiscipline coordination is used to identify and resolve interfaces between equipment, piping, structures, electrical systems, instrumentation and control functions before site execution.
Process, Pipeline and Hydraulic Studies
RIDA T.S. performs engineering studies to evaluate system behaviour under defined operating conditions and support technical decision-making.
Depending on the project scope, activities may include:
- Process calculations
- Hydraulic calculations
- Pipeline sizing and pressure-drop assessment
- Flow and velocity evaluation
- Pump and equipment duty review
- Operating scenario assessment
- Process simulation
- Utility demand assessment
- Equipment capacity review
- Identification of potential operating constraints
These studies provide technical inputs for equipment selection, pipeline configuration, control philosophy and the evaluation of modifications to existing facilities.
The assumptions, boundary conditions, calculation methods and acceptance criteria are documented for review as part of the engineering deliverables.
Process Safety and Risk Assessment Support
Process safety activities are defined according to the facility, project phase and contractual scope.
RIDA T.S. can support or coordinate activities including:
- Hazard identification
- HAZOP preparation and participation
- Review of safeguards and protective functions
- Safety Integrity Level assessment support
- Review of alarms, trips and interlocks
- Identification of safety-critical interfaces
- Technical risk registers
- Follow-up of engineering recommendations
- Incorporation of approved actions into design documents
Where applicable, HAZOP activities may reference the methodology described in IEC 61882, while functional safety and Safety Integrity Level activities may reference the IEC 61511 series for the process industry.
The exact methodology, applicable standards, study leadership requirements and approval responsibilities must be defined for each project. Reference to these standards does not constitute a general statement of certification or compliance.
Technical Deliverables
Engineering deliverables are defined by the project phase, discipline and contractual scope.
Depending on the project, they may include:
- Design basis and engineering criteria
- Process flow diagrams
- Piping and instrumentation diagrams
- Process and hydraulic calculations
- Equipment and instrument data sheets
- Equipment layouts and general arrangements
- Piping layouts and isometric drawings
- Civil and structural drawings
- Electrical single-line diagrams
- Cable schedules and routing documents
- Instrument indexes and input/output lists
- Control philosophies and functional descriptions
- Cause-and-effect matrices
- Technical specifications
- Material requisitions
- Bills of quantities and material take-offs
- Technical bid evaluations
- Vendor document reviews
- Inspection and test requirements
- Construction and installation documents
- As-built and final engineering documentation
Documents are developed and reviewed according to the agreed project workflow, client requirements and document control procedures.
Selected Engineering Experience
RIDA T.S.’s engineering capability is demonstrated through multidisciplinary industrial projects delivered in Libya.
Acid Plant Renovation
Integrated engineering of chemical storage, mixing, piping, containment, electrical, instrumentation and control systems within an existing industrial facility.
View the Acid Plant Renovation project
Mabruk EPF Metering Skid
Engineering and integration of a metering skid for a new Early Production Facility, incorporating Coriolis flow measurement, piping, instrumentation, control equipment, factory testing and site commissioning.
View the Mabruk EPF Metering Skid project
Methanol Export Custody Transfer System
Multidiscipline engineering covering civil works, mechanical assembly, piping, instrumentation, control interfaces and data acquisition for a methanol export metering system.
View the Methanol Export Metering project
Crude Oil Heaters Control System Upgrade
System architecture, control cabinet engineering, PLC programming, field instrumentation configuration and commissioning support for the upgrade of crude oil heater control systems.
View the Crude Oil Heaters project
Tie-in Piping and Prover Systems
Engineering of piping connections, manifolds, valves, drainage systems, civil works and prover interfaces at the ARC Terminal.
Sectors and Applications
RIDA T.S. provides engineering support for:
- Oil and gas production facilities
- Early Production Facilities
- Pipelines and terminals
- Refineries and processing plants
- Petrochemical and chemical facilities
- Power generation facilities
- Water and wastewater infrastructure
- Industrial utilities
- Brownfield modifications and plant upgrades
- Equipment packages and control system projects
Engineering requirements, deliverables and design controls are adapted to the operating environment and project execution model.
Standards and Design Requirements
Engineering activities are performed against the client specifications, project design basis, applicable regulations and contractually identified codes and standards.
The applicable documents and editions must be established for each project. Where relevant, this may include API, ASME, IEC, ISO, NFPA or other industry standards appropriate to the discipline and application.
The use of a standard is confirmed through the project documentation and defined scope. It should not be presented as a general or automatic statement of compliance across every RIDA T.S. project.
Al-Noflieen Area, P.o.box 536, Tripoli Libya
info@rida-ts.com
Safe dismantling of legacy housings, structural reinforcement, installation of AAF air filtration modules, and sealing verification.
RIDA T.S. successfully executed a large-scale overhaul program across two major oil fields.
The client required routine servicing and overhauling of S3 gas turbines at the Tebisti Field